Panasonic WV-SW314 Guida di Installazione Scaricare il pdf (Pagina 33)

<WV-SW316L/WV-SW316>

Mount the front cover.

<WV-SW314>

Attach the desiccant (accessory) to the inner bottom side of the front cover along the guide rib, and

mount the front cover.

Desiccant (accessory)

Guide rib

Fixing screw x4

(3)

(1)

(2)

(4)

IMPORTANT:

 • Besuretoattachthedesiccant(accessory).Refertotheinstructionsforthedesiccantforhow

to attach it.

SW314

 • Thetighteningtorquedescribedbelowshallbefollowedforthe4fixingscrewsoffrontcover.

Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}

 • Thetighteningsequenceofthe4fixingscrewsofthefrontcovershallbeobservedandrepeat-

ed twice as described in the illustration above.

((1)

→

(2)

→

(3)

→

(4), twice)

 • Make sure the packing has not come off or become askew. If this happens put it back into

place.

 • Makesurethepackinghasnodustorothercontaminantsonit.Removeanydustorcontami-

nants on the packing.

 •

Remove the cover film from the clear part of the front cover section after the installation is complete

Do not touch the clear part of the front cover section by hand directly after removing the cover film

Mounting the front cover

Fixing screw x4

(3)

(1)

(2)

(4)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Nessun commento

Panasonic WV-SW314 Guida di Installazione Pagina 33