Panasonic WV-SW314 Guida di Installazione Scaricare il pdf (Pagina 32)

w To adjust the angular field of view with a higher zooming effect even after adjusting the angular

field of view almost fully in the "T" direction, hold down the focus assist button (F.A.)/extra opti-

cal zoom button for 5 seconds or more. 2x extra optical zoom will be applied. When the image

capture size under "VGA" is applied, the zoom factor can be adjusted up to 2x without deterio-

ration of image quality. When holding down the focus assist button (F.A.)/extra optical zoom

button again for 5 seconds or more, 1x extra optical zoom will be applied.

e Tighten the zoom lock knob.

r Press the focus assist (F.A.) button.

→

 "FOCUS ADJUSTMENT" menu will be displayed.

The focus assist function will be activated to perform the optimum adjustment.

t When the focus lock knob is positioned near the best focus position, the position will automati-

cally be memorized as the "PEAK HOLD" position. (The closer the focus ring is positioned to

the best focus position, the greater the "PEAK HOLD" value becomes.)

y When the focus lock knob is moved, the current focus position will be indicated on

"INDICATOR". Adjust the focus position so that the indicator value goes close to the "PEAK

HOLD" position.

u When the indicator value goes to the best focus position, "BEST FOCUS" will be displayed in

reverse at the lower right corner of the screen.

i Tighten the focus lock knob so as to fix the best focus position.

o Press the focus assist (F.A.) button again to close the "FOCUS ADJUSTMENT" menu.

(No operation for 3 minutes also closes the menu.)

IMPORTANT:

 •

When using a model equipped with the focus assist (F. A.) function, defocus may be caused by the

dome cover attached.

In this case, the focus adjustment will be easier by detaching the dome cover and moving the

focus ring to the "N" direction.

 • Beforeattachingthedomecover,makesurethatthesubjectispresent.

Note:

 • Ifthezoomlockknobisfullyrotatedinthe"W"direction,theperipherymaybecomedark.In

such a case, rotate the zoom lock knob in the "T" direction for readjustment.

 • When shooting the following subjects, close the "FOCUS ADJUSTMENT" menu by pressing

the focus assist (F.A.) button again, or adjust the focus to obtain the best focus position while

monitoring images from the camera.

•Placewherethefrontcovereasilybecomesdirty •Subj.movingfrequently

•Subj.withlargeilluminancechange •Subj.withlowilluminance

•Subj.withreflectionorextrabrightness •Subj.throughawindow

•Subj.withlesscontrastsuchaswhitewall •Subj.withheavyflicker

 • If the zoom lockknobisslightlytightened beforethezoomisadjusted,the ring will become

stable, making fine adjustments easier to perform.

 • If the focus lock knob is slightly tightened beforethefocusis adjusted, the ring will become

stable, making fine adjustments easier to perform.

 • In case the angular field of view has changed during adjustment, close the "FOCUS

ADJUSTMENT" menu once by pressing the focus assist (F.A.) button. (When the angular field

of view changes, the indicator values of "PEAK HOLD" and "INDICATOR" also change.) After

fixing the angular field of view, retry Step 3.

 •

If the 2x extra optical zoom is applied when "1280x960", "1280x720" is selected for the image capture

size, the image quality will be deteriorated because the effect of Extra Optical Zoom is not provided

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

Commenti su questo manuale

Nessun commento

Panasonic WV-SW314 Guida di Installazione Pagina 32

Commenti su questo manuale

Prodotti e manuali riguardandi Telecamere di sicurezza Panasonic WV-SW314