Panasonic WV-ASC970 Istruzioni per gli Interventi Pagina 70

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 69
70
[LOG]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Log generation/save characteristics }
***{Format:<LogFileName>=<Minutes>,<Days> }
***{Minutes=FrequencytocopytoHD(1-30min)}
***{Note:Valuesoutsidethisrange=1min. }
***{Days=daystosaveonHD(5-30) }
***{Mode=0-off(default) }
***{ 1 - on }
UserLog=10,7,1
SwLog=10,7,0
AlarmLog=10,7,1
VideoLossLog=10,7,1
RS232ALARM section
Note:
• ThissectionislegacysettingforexistingWJ-MPU955andshouldnotbechanged.
All RS232C ports can be set in the admin console for the alarm interface. This section describes the
characteristics for the external alarm port only. Other use of the port, such as for an external controller,
must be configured using the admin console.
[RS232ALARM]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Enable/Disable Serial Alarms by port }
***{Format:AlarmPort=<port1>,<port2>,<port3> }
***{port#=use"1"toindicatedesiredport(onlyone) }
***{port#=use"0"toindicateportsnotdesired }
*AlarmPort=1,0,0
ALARMTEXTDISPLAY section
This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action
text.
There is a 38 character maximum for alarm text.
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{Format:AlarmTextDisplay=<option> }
Vedere la pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 78 79

Commenti su questo manuale

Nessun commento