Panasonic WV-CW484 Manuale Utente

Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.No model number suff

10Major Operating Controls and Their Functionsqwerty!1!2!3!4!6!7!8!9!55uio!0

11q Power cable (12 V DC or 24 V AC)Cautions:1. Connect to 12 V DC (10.5 - 16 V) or24 V AC (19.5 V - 28 V) class 2power supply only. Make sure toconn

12Lens Mounting (WV-CW484FK, CW484SK)1. Before mounting the lens, remove the protection sheet from the camera.2. Mount the optional lens to the camera

13InstallationsThe following installation should be made by qualified service personnel or system installers.Important:• Prepare four fixing screws to

14● Using Mounting Bracket WV-Q114 (Option)• Secure the optional camera mounting bracket to wall or ceiling, and fix the provided cam-era attachment t

15<Fixing the camera attachment to the mounting bracket>Camera attachment (provided)WV-Q114TOPTOPTOP

16 How to mount the camera1. Connect the power cable and the BNC plug of the video output cable. (Refer to p. 23Connections.)2. Secure the camera wit

175. Remove the dome cover from the mainbody by loosening the three dome covermounting screws.The dome cover is fixed with tamper-proof screws.Loosen

187. Secure the camera unit to the bracket withthe camera lock screw.(The illustration describes an example usinga junction box.)Camera fixing screw8.

Waterproof Process• When routing cables sideway using Mounting Bracket WV-Q114 (option) or installing thecamera under eaves, apply waterproof proces

2The lightning flash with arrow-head symbol, within an equilater-al triangle, is intended to alert theuser to the presence of uninsulat-ed "dange

Notes:• Surely attach a pipe fitting to the bracket to avoid exposing the cables. Otherwise, cabledeterioration resulting from cable exposure may caus

FARNEARTELEWIDEFocus leverZoom lever21Image AdjustmentYou can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the con-nec

225. Aim the camera at the targeting objects and if applicable adjust the zoom angle.6. Press the [DOWN] button.→ The LED indicator will light up, and

23Connections● Video Output ConnectionConnect the video output connector to themonitor or other system device with the pro-cured coaxial cable. The ma

24Copper wiresize (AWG)Length ofCable(Approx.)#24(0.22 mm2)2065#22(0.33 mm2)30100#20(0.52 mm2)45160#18(0.83 mm2)75260Recommended wire gauge for 24 V A

25Heater unit screwOptional heater connector Optional Heater Unit WV-CW4H● IntroductionInstalling this heater unit enables the camera to operate in a

26Flange-back (Back Focus) AdjustmentThis adjustment can be also performed on the setup menu.Refer to p. 41. Back-focus Setting for details.Important:

27About Setup MenusBefore operation, setup of this camera is required. On the setup menu, you can check currentsettings and perform settings to meet r

28SPECIALCHROMA GAIN Adjust the chroma level (color density).AP GAIN Adjust the aperture level.PEDESTAL Adjust the pedestal level (brightness).HUE Adj

29 Basic operationThe following are descriptions of how to configure each setup item using the operation buttons(refer to p. 10) on the camera. Setup

3Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this

306. To exit from the SETUP menu and display images from the camera, move the cursor onto"END" and press the [SET] button.Notes:• To prevent

31Setting ProceduresFirst, select a language for menu display and camera ID display.Language Setup (LANGUAGESETUP)1. Select LANGUAGE on the top menu a

32• To erase all characters of the camera ID, select RESET and press the [SET] button.Note: For Chinese language, up to 8 characters can be entered.4.

332-2. ALC Mode with SUPER-D3 OFF1. Move the cursor to ALC on the CAMERASETUP menu or select OFF for SUPER-D3 onthe ALC CONT menu.→ MASK SET↓ appears

34Notes:• Only OFF is available when SUPER D3 is set to ON.• When a faster speed is selected for the electronic shutter, the picture will generally be

356. Synchronization Setting (SYNC)1. Select a sync mode.VD2: Multiplexed vertical drive, highest priorityLL: Line-Lock, follows the phase of supplied

36AWC Setting1. Select AWC and press the [L] button. → AWC will change to AWC → PUSH SW.2. Press SET.→ PUSH SW will be highlighted while the AWC setti

375. Select ON or OFF for ALARM under DISPLAY MODE.ON: Outputs an alarmOFF: Does not output an alarm. This is applicable any of the following controll

38About MODE2 of Motion Detection• The camera will detect a scene change in the following cases.When the lens is fully sprayed or covered with a cloth

39→ When AUTO1 or AUTO2 is selected, LEVEL and DURATION TIME appear.3. Select a threshold LEVEL to switch betweenthe color and black-and-white mode. T

4Limitation of LiabilityTHIS PUBLICATION IS PROVIDED "AS IS"WITHOUT WARRANTY OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDINGBUT NOT LIMITED

405. Select →PUSH SW for SCALE and press SET.→ Zone scale adjustment becomes available.6. Adjust the zone scale using the [LEFT], [RIGHT], [UP], or [D

41• Image stabilization may not function where there is excessive camera movement or whenthe scene is low light or low contrast objects.16. LENS• When

4. Select a mode for C/L ↔ B/W. The default setting is AUTO.AUTO: Adjusts the back-focus automatically every time the camera switches the modebetween

4318-2. Aperture Gain Setting (AP GAIN)Move the "I" cursor to adjust the aperture gain level.Lower the level when moire (a kind of noise, op

4418-6. To reset to the default settings (CAMERA RESET)1. Select CAMERA RESET. → The PUSH SW is highlighted.2. While holding down the [LEFT] and [RIGH

2345Cause/solutionTroubleshootingBefore asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be sol

46SymptomCause/solutionReferencepages• The power cable is worn out. Thismay result in electric shock or afire. Unplug the power plug fromthe AC outlet

47SpecificationsGeneral specificationsPower source and power 24 V AC 60 Hz, 11 W (With heater), 12 V DC 470 mAconsumption:Ambient temperature: –10 °C

48Digital noise reduction: High or LowResolution: Normal or HighBlack-and-white mode: AUTO1, AUTO2, ON, or OFFPrivacy zone: ON (1/2), or OFFAuto image

49

5PrefacePanasonic's WV-CW484 series cameras (WV-CW484F/WV-CW484S/WV-CW484FK/WV-CW484SK) introduce high picture quality by use of Super-Dynamic 1/

Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systems www.panasonic.com/securityFor customer supp

6CONTENTSImportant Safety Instructions ...3Limit

7PrecautionsThis apparatus has no power switch.Power is supplied from an external 12 VDC/24 V AC power-supply device. Refer toservice personnel for ho

8Do not use strong or abrasive detergentswhen cleaning the camera body.Use a dry cloth to clean the camera whendirty. When the dirt is hard to remove,

9Consumable partsContact your dealer for replacement of thefollowing part when the time comes:Cooling fan needs replacement after around30 000 hours o