Panasonic STG30LE Manuale Utente Scaricare il pdf (Pagina 26)

Troubleshooting

Playback does not start.

≥ Depending on your environment or connected

devices, it may take some time.

The settings are reset to the factory defaults.

≥ Updating the firmware may reset the settings.

This unit turns off suddenly.

≥ If the SSD is removed or malfunctions while this

unit is in operation, this unit will turn off

automatically. Check to see if the SSD is attached

correctly to the main unit. (> 12, 13)

≥ If this unit still turns off even after you have

attached the SSD correctly, there may be a

malfunction with the SSD.

The sound is interrupted.

≥ Depending on your environment, the audio may

be interrupted during playback. Check the

operating instructions of the connected device

and the connection to the device.

Recording does not start.

≥ Make sure that the disc is compatible with this

unit. (> 28)

≥ There is moisture on the lens. Wait for about an

hour and then try again.

≥ Recording to unfinalised CD-R and CD-RW discs is

not possible.

≥ WMA/MP3 is not supported. Refer to “CDs” (@ 28)

for information about the discs this unit can play

back.

Cannot connect to the network.

≥ Confirm the network connection and settings.

(> 18, 19)

≥ Make sure that the multicast function on the

wireless router is enabled.

≥ Make sure that the devices, smartphone and

tablet are connected to the same network as this

system.

≥ Turn off and on the network connection of the

smartphone, tablet or connected device, and

reconnect it to this unit.

Playback does not start.

The sound is interrupted.

≥ If the signal is interrupted, changing the location

and angle of the broadband router may improve

the signal reception of the connected device.

≥ If several wireless devices are simultaneously using

the same wireless network as this unit, try turning

off the other devices or reducing their wireless

network usage.

≥ If playback has stopped, check the playback status

on the smartphone, tablet or connected device.

This unit does not recognize the USB connection

correctly.

≥ Check to see if another device can detect your

USB device.

≥ If you connect USB HDD to this unit, use the USB

cable that is supplied with the HDD.

The USB device responds slowly.

≥ Large-capacity USB devices may respond slowly.

The SSD is not detected.

≥ Check to see if the SSD is attached

correctly. (>

12, 13

)

The STATUS indicator is flashing red.

≥ You might have forgotten to format the new one.

Before using a new SSD, be sure to format it on

this unit. (> 20)

Disc

Network

USB

SSD

ST-G30L-SQT1342_mst.book 26 ページ２０１６年２月２９日　月曜日　午前１１時１４分

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Commenti su questo manuale

Nessun commento

Panasonic STG30LE Manuale Utente Pagina 26

Commenti su questo manuale

Prodotti e manuali riguardandi no Panasonic STG30LE