Panasonic DMPMST60EB Istruzioni per gli Interventi Scaricare il pdf (Pagina 30)

- 30 -

Reference

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– INFO LED and POWER LED start to flash,

and “00RET” is displayed on the screen.

3 Press [1] (right) repeatedly on the remote

control until “03 VL” is displayed on the

screen.

4 Press [OK].

This unit does not recognize the USB

connection correctly.

¾ Disconnect and reconnect the USB cable. If it

still does not recognize the connection, turn

this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following:

– a USB hub

– a USB extension cable

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The unit switches to standby mode.

¾ This unit will automatically turn to standby

mode after 30 minutes if it is inactive.

The images from this unit do not appear on

the TV.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– INFO LED and POWER LED start to flash.

3 Press and hold [8] and the blue button on the

remote control at the same time for more than

5 seconds.

Set the item again. (> 24)

– When Dolby Digital Plus audio is not output

properly, select “Yes” in “Default Settings”

and make proper settings. (> 27)

¾ The unit and TV are using different video

systems.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– INFO LED and POWER LED start to flash,

and “00RET” is displayed on the screen.

3 Press [1] (right) repeatedly on the remote

control until “05P/N” is displayed on the

screen.

4 Press and hold [OK] for more than 5 seconds.

The system switches from PAL to NTSC or

vice versa.

Video is not output in high-definition.

¾ Confirm that “HDMI Video Format” in the

Setup menu is set properly. (> 24)

3D image is not output.

¾

Is there a non-3D compatible amplifier/receiver

connected between this unit and a TV? (

>

8)

¾ Are the settings on this unit and the TV

correct? (> 20)

¾ Is the amplifier/receiver that is connected

between this unit and TV on?

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

¾

Confirm the “TV Aspect” is set properly. (

>

27)

¾ Adjust the aspect setting on the TV.

Picture

1 2 ... 25 26 27 28 29 30 31 32 33 34

Commenti su questo manuale

Nessun commento