Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10Avoid placing receptacles that contain liq-uids such as water near this product.If liquid spills onto the unit, it may cause fire or an electric sho

11Transmission intervalImage transmission interval may become slow depending on the network environment, PC performance, shooting subject, access num-

12Precautions for InstallationPanasonic assumes no responsibility for injuries or property damage resulting from fail-ures arising out of improper ins

13Screw tightening • The screws and bolts must be tightenedwith an appropriate tightening torque according to the material and strength of th

14Major operating controls12 V DC power supply terminalNetwork connectorLive indicatorINITIAL SET buttonMounting hole qMounting hole wVentilation are

15Video input connector RS485 portVideo Input terminal switchVideo Input terminal switchTerminated (default setting)Not terminated

16PreparationsThe screws used to mount the unit to a wall or ceiling are not supplied.Prepare the screws according to the material, structure, strengt

17Mounting to a wall or ceilingzAs necessary, set the terminal resistance (75 Ω) to on or off with the video input terminal switch. (☞ Page 15)xUse 2

18IMPORTANT: • Takethefollowingcautionstopreventthisproductfromoverheating.Failuretoobservethismay cause fire or trouble. · Do not bl

19ConnectionCaution: • ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITEDPOWER SOURCE (IEC/EN/UL/CSA 60950-1). •

2The model number and serial number of this product may be found on the surface of the unit.You should note the model number and serial number of this

20IMPORTANT:•TheRS485portofthisunitisintendedforusewith4-linecommunications.When connecting 2-line communication devices, make connect

21When using 12 V DC power supply* q Loosen the screws of the power cord plug (accessory). w Connect the cable of the 12 V DC power supply*tothep

22When using PoE (IEEE802.3af compliant)ConnectaLANcable(category5orbetter,straight,STP*)betweenaPoEdevice(suchasahub)and the networ

23Connection example when connecting to a network using a PoE hubLAN cable (category 5 orbetter, straight, STP*)PoE device (hub)PCBNC coaxial cableAna

24Configure the network settingsConfiguring the unit so that it can be accessed from a PCThe following are descriptions for when the unit with default

25Note: •When more than one unit is displayed in [IP Setting Software] screen, click the unit with the same MAC address as the MAC address printed o

26When using DC power supply•Is12VDCpowersupplyconnectedtothe power supply terminal? → Check whether the connection is appropriately estab

27•Non-interlacesignalssometimesmaynot be transmitted to display setup menus. The setup menus of the matrix switchers such as WJ-SX550 Series a

28Specifications• BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: 12VDC*:200mA,PoE48V:75mA(Class1device)*FORUL

29Resolution PAL mode: Picture (Camera) mode: H.264 JPEG Picture (Camera) mode: H.264 JPEG Picture (Camera) mode: H.264 JPEGVGA [4:3]VGA (

3ContentsImportant safety instructions ... 4Limi

30FTP client:Alarm image FTP transmission, FTP periodic image transmission*4Multi-screen: Up to 16 camera images can be displayed simultaneously on a

31Standard accessoriesInstallation Guide (this document) ... 1 pc.Warranty card (P model only) ...

For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/busines

4Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

5Limitation of liabilityTHIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, TH

6Main functionsMotion adaptive interlace/progressive conversion functionIt is possible to generate digital images with smooth movements by detecting m

7System requirements for a PCCPU: Intel® CoreTM 2 Duo 2.4 GHz or faster recommendedMemory: 512 MB or more (A minimum of 1 GB memory is required whe

8Trademarks and registered trademarks • Adobe, Acrobat Reader, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporat

9PrecautionsRefer installation work to the dealer.Installation work requires technique and experi-ences. Failure to observe this may cause fire, elect